email this page

Email this page to a friend to share information from SharpUSA.com. Just fill out the fields below and press Send.

  • * indicates a required field
  • (Limited to 500 characters)

  • Send Cancel

Save This Page

Register for My SharpSign In to My Sharp

PN-V602

Key Features

  • 60" Class LED Video Wall Display with Ultra Slim Bezel
  • Up to 1500 cd/m2 brightness; up to 1Mil:1 Contrast Ratio
  • Full Array LED Backlight with Local Dimming
  • Enlarge (Zoom) Display Mode for Video Walls up to 5x5
  • Built-in 10W per Channel Stereo Audio Amplifier
  • Compatible for 24/7 use in Landscape and Portrait Modes
  • 3-Year On-Site Parts/Labor/Backlight Limited Warranty

Where to Buy

GO

Buy Online

View Product Tour

PN-V602 Professional LCD Monitor
View Larger Image
Basic Specifications
Screen Size Class 60" Class (60" Diagonal)
Bezel Width 2.4 mm (right/bottom)
4.1 mm (left/top)
Native Display Resolution 1366 x 768
Maximum Brightness (average) 1,500 cd/m2
Landscape and Portrait Mode Operation Yes
Certified for 24/7 Continuous Operation Yes
Fanless Architecture No
Audio 10W + 10W Stereo with built in speakers
LCD Type UV2A LCD
Number of Colors (approx.) 16.77 Million colors
Contrast Ratio Up to 1,000,000 (local dimming set to HIGH); Up to 5,000:1 (local dimming OFF)
Aspect Ratio 16:9
Viewing Angle (H/V) 176º H x 176º V (CR>/=10)
Active Screen Area (approx.) 52-5/16" W x 29-7/16" H
Frame Rate 60 Hz
Pixel Pitch 0.973 mm H x 0.973 mm V
Video System NTSC (3.58 MHz; 4.43 MHz), PAL, PAL60, SECAM
Computer Input - Video Analog RGB (0.7 Vp-p) [75-ohm], Digital (conforms to DVI 1.0 standards)
Computer Input - Synchronization Horizontal / Vertical separation (TTL: positive/negative), Sync on green, composite sync (TTL: positive/negative)
Computer Input - Plug & Play VESA DDC2B
Power Management VESA DPMS, DVI DMPM
Response Time 6 ms (gray to gray, avg)
Terminals
PC/AV Video Input Analog mini D-sub 15-pin. DVI-D 24-pin HDCP Compatible (requires optional PN-ZB01); Analog 5-BNC (requires optional PN-ZB01; analog RGB and component are menu selectable).
PC/AV Audio Input 3.5 mm mini stereo jack
Video Input Composite Video - BNC (requires optional PN-ZB01)
S-Video Input 5-Pin DIN (requires optional PN-ZB01)
Component Video BNC (Y, Cb/Pb,Cr/Pr) (requires optional PN-ZB01; component video and analog RGB are menu selectable).
HDMI® Yes - compatible for both PC and AV components
Audio (AV) RCA pin (L/R) x 2 (requires optional PN-ZB01)
PC Output DVI-D 24-pin (HDCP compatible, PC/AV signal; requires optional PN-ZB01)
Audio Line Output RCA pin (L/R) - selectable fixed or variable line output
Speaker Output 10W + 10W Stereo (6-ohms; requires optional PN-ZB01)
LAN Port RJ-45 (requires optional PN-ZB01)
RS-232C D-sub 9-pin
Functions
Screen Adjustment Auto (Clock, Phase, H-POS/V-POS) / Manual
Gain Control Auto (Black level, Contrast) / Manual
Digital Scaling (expansion) Yes (VGA/SVGA/XGA/SXGA -> 1366 x 768)
Digital Scaling (compression) 1920 x 1200, 1920 x 1080, 1600 x 1200, 1280 x 1024
Main User Adjustments Clock, Phase, H-POS/V-POS, Black level, Contrast; Color temp (15 steps preset + 5600K/9300K + User setting); Color mode (Standard/sRGB/Vivid); Gamma (1.8/2.0/2.2/2.4/User setting); Brightness, Volume, Audio (Treble/Bass/Balance), OSD-POS; Picture Adjustment (Tint, Color Intensity) [PC/AV mode]; R/G/B/Y/M/C independent adjustment [AV mode]
Information Model No., Serial No. etc.
Real Time Clock Setting Yes
Scheduling Function Yes (time, day of the week)
All Reset Yes
Reset Screen/Picture/Audio adjustment setting, etc.
Adjustment Lock YES (incl. Power button)
Daisy Chain (DVI-D) Optional (PN-ZB02): max. 5 units (HDCP compliant). (Splitter required for more than 6 units.)
Enlarge Yes (Up to 5x5)
Frame Width Adjustment Yes
PinP / PbyP Yes (PinP : 12 steps)
Power On Delay 1-60 seconds (with 1 second interval)
Audio Input Change Yes
Picture Flip No
Self Adjust Yes (PC Analog Input)
Log Save / Output Yes
Temperature Control Yes
Hardware Diagnosis Yes
Monitor Control Software Support Yes
Web Browser Setting (LAN) Optional (PN-ZB02)
E-Mail Notification Optional (PN-ZB02)
SNMP Optional (PN-ZB02)
Overscan Setting (AV Input) Yes
Image Size Change Function Yes
Resolution Change Function (PC analog) Yes
RS-232C Communication Speed Change Yes
Conversion of Stereo Audio to Monaural No
Selection of Audio Input per image input Yes
Internal / External Speaker Select No. External Only (with Optional PN-ZB02)
Power
Power Consumption 510W Max. (Local dimming off)
Standby Power Consumption 1W (standby mode in Standard), 0.5W (standby mode in Low Power)
Power Source 100 - 240V AC, 50/60 Hz
Weight & Dimensions
Dimensions
Product Dimensions (wxhxd) (inches) 52-5/8" (W) x 5-7/8" (D) x 29-11/16" (H)
(1335.9mm x 149.3mm x 754.2mm)
Package Dimensions (wxhxd) (inches) 62-7/32" (W) x15" (D) x 36-11/16" (H)
(1580mm x 381mm x 932mm)
Weight
Net Product Weight (lbs.) 110 lbs. (approx)
Shipping Weight (lbs.) 119 lbs.
Additional Specifications
Price (MSRP) $17,250
UPC 074000069084
Tuner None
Operating Temperature 0º C - 40º C
Operating Humidity 20% to 80% RH (no condensation)
Storage Temperature -4 ~ 140º F (-20 ~ 60º C)
Limited Warranty 3-Year on-site. Covers parts, labor and backlight in both landscape and portrait mode operation.
Regulatory Approvals UL 60950, FCC Class A
Mounting Configuration VESA (6 points), 200 mm (7-7/8") pitch, M6 screws or VESA (4 points), 200 mm (7-7/8") pitch, M6 screw
Remote Control Optional PN-ZR01 Control Kit (remote controller and remote control sensor box). UPC: 074000069022. Also available: wired RJ-45 and RS-232C (RJ-45 requires optional PN-ZB01)
Included Accessories 3-wire (grounded) power cord (approx. 10'), CD-ROM, operation manual, stand hole protection cover x 2, vertical sticker (operation panel), vertical sticker (logo), blank sticker, cable clamp x 2
Optional Input/Output Interface Board Yes - PN-ZB02. Easily attaches to rear of display and adds DVI-D input/output, 5-BNC analog RGB input, composite video input, component video input, S-video input, stereo audio (RCA) input x 2, RJ-45 LAN display control, stereo speaker output (10W x 2, 6-ohms). UPC: 074000047044
Optional PC N/A
Optional Mounting Hardware Eight optional mounting hardware bundles include the hardware needed for the most popular video wall configurations, for both wall mounting and free standing installations.
Compatible with SDSS Sharp Digital Signage Software (optional) Yes. SDSS software delivers content program creation, registration, scheduling and distribution of pre-scheduled information on Sharp PN series displays. Operates easily with user-friendly interface
Also Available PN-ZR31 Optional fan cover (for use when display is mounted horizontally in a "face up" installation).
PN-ZR32 Optional long mirror frame for use between "longer" sides of the displays.
PN-ZR33 Optional short mirror frame for use between "shorter" sides of the displays.
(Mirror frames help to further minimize lines between monitors by reflecting mirror images from the display content, helping create more dynamic video walls with an even smoother big picture effect.)

Product specifications and design are subject to change without notice.

    Choose your experience

    Tablet users can view our full site or experience our mobile optimized site.

    Go to Mobile site. Go to Desktop site.